NLP1924J

NL Series - Cabled Single Conductors, CL2 Twisted Pairs Unshielded

Standard CL2 Cables
NEC 725 Tray Cables
Cabled Singles (NL Series)
National Wire & Cable Corporation manufactures a complete line of DUAL-RATED
multiconductor NEC TRAY CABLE Type CL2, for signal, instrumentation and control
uses. Also UL rated for use as 300 Volt Appliance Wiring Material (AWM). These are available as cables singles or pairs, with optional overall shield of aluminum-Mylar foil with drain wire. Cabled conductors use stranded tinned copper wire with 0.010” wall of tough extruded black poly-vinyl-chloride (PVC) insulation, rated for 300 Volt use under U.L. Style 2464.
Conductors are helically cabled and laid for optimum flexiblility, with a Mylar tape barrier wrap (or Mylar + Foil) applied between cabled wire bundle and outer jacket.
All wires are color coded using 10 standard solid colors plus white with stripes. Cables singles are color coded the same as our NQ and NX cable families per MIL-STD-681.
Cabled pairs are color coded the same as our NQP and NXP cable families.
Finished cables comply with applicable U.L. tests for N.E.C. Type CL2 TRAY CABLE
Vertical Tray Flame Spread. All materials are flame-spread retardant and fungus resistant. The products are DUAL-RATED for AWM use as U.L. Style 2464 300 Volt,
80°C, OR for U.L. 13 Type CL2 TRAY CABLE 105°C use.

Specifications

Rated Working Voltage 300 Volts for AWM uses.
Rated Temperature DUAL-RATED:+105°C or +80°C dependent on AGENCY intended use.
Insulation Breakdown Voltage Greater than 3400 Volts AC RMS as 60 Hz.
Capacitance Nominal capacitance from a wire to all else in a cable ranges from 25 to 45 PF/FT at 1 kHz, depending on AWG and position.
Insulation Leakage 100 megohms/1000 ft. min. at 500 VDC from a conductor to all else in a cable, at 25°C, U.L. Agency
Voltage & Temperature Ratings UL rated: +80°C AWM, 300 VOLT per UL Style 2464. UL rated +105°C CL2 TRAY CABLE per UL 13, NEC Type CL2.
Bending Characteristics All cables are suitable for flexing to a circle diameter of 8 cable diameters from +105°C to -10°C. Recommended flex diameter should be greater than 20 cable diameters for flexing at -20°C.
Characteristic Impedance RF Impedance of twisted pairs or adjacent singles is: 87 ohms in AWG 24; 80 ohms in AWG 22. Suitable for digital signals.

DOWNLOAD PDF NL CL2 Cables. Also listed in the National Wire Printed Catalog.

RoHS products are listed with an "R" in the second position of the Part Number.

UNSHIELDEDYes
GAUGE OF CONDUCTOR24
NOM. CABLE O.D. (INCHES)0.442
NOM. WEIGHT LBS. PER 1000 FEET106
NUMBER OF PAIRS19
 
Enter desired quantity. Press 'Add to RFQ'
to add PART NUMBER NLP1924J to your RFQ.

View RFQ